We are now securing the underfloor heating mat to the floor, ready to carry out the continuity testing; this will ensure the heating mat is undamaged and ready to be covered over in floor screeding. The next stage is the floor tiles are installed, then we will return for our final visit, test the underfloor heating mat once more and verify the results with the previous data; once we have confirmed that the mat is suitable to be connected then it’s time to turn it on and let the customer enjoy lovely warm floor tiles for years to come. 

We have been working on a large installation over in Ottinge and we have just started the Underfloor Heating. Here you can see the first stage of setting out the heating mat, ready to be fixed down and tested.

We have been working on a 3 phase supply on a farm in Birchington and this photo shows that now and again we have to turn our hands to all sorts to get the job done!!

How do you choose an electrician from Herne Bay or anywhere for that matter?? It seems that there is a lot of us out there; but how do you know who is going to be right for you?? Well…. We think a good place to start is by matching us to your personality. Sounds a bit random, but bear with me…… You see, we have to not only have all the right qualifications, be registered with an approved body such as Napit, have the right attitude to work, the right equipment etc etc but most importantly, (we feel), is that we make you feel comfortable; after all, we will be working in your home! Myself and Rob always treat people and their homes how we would like to be treated ourselves, this way the experience is a good one and everyone feels the benefit. Take a look at our checkatrade page to see what other people think. 

Here you can see Rob has made light work of getting the spar bath ready! Now….. what’s next?? Oh yes; time to start on the wiring to the ‘Velux’ windows and the underfloor heating.

We have been working in Ottinge for a customer who has asked us to wire up the spar bath. We have also just completed a fuse board change and full test on the house as well as new wiring in the new extension and supplying and installing underfloor heating. 

Rewire shed and garage ,plus other work Very well done to 3core on there work,very courteous ,and polite, very high standard of work ,100% would use them again,thank you,whitstable:} ~

We are always very pleased to get positive feed back from our customers; we rely on it to keep us in work. Why not take a look at some of the other things people are saying about us on our ‘Checkatrade’ page.

We were called by a customer in Herne today, saying that the electric shower was not working properly. After a quick inspection, we found this!! A loose connection had almost caused a fire in the loft! You can see from the picture how bad it had got! We have now replaced the switch and repaired the damaged cable.

New external meter box, internal consumer unit and power points. Very pleasant people to deal with who made sure they understood my requirements and provided an estimate in quick time following a comprehensive site inspection. Completed the works on time and in accord with agreed quote to a very satisfactory standard. Would have no hesitation in recommending them. ~

We were called to a property in Canterbury where the customer had been told that there was no earth present in the kitchen socket. He became concerned when it was pointed out that if there was a problem the metal decorative front plate may become live and he would be un aware until he got a shock from it! He called us in to take a look and after using our inspection camera to avoid too much disruption, we found the problem. We then had to make an inspection hole to see what was going on inside the wall. What we found was that whoever had attempted to make the alteration to the existing electrical system didn’t do the job very well and had left the property with what could well of been a very nasty situation for our customer. The picture shows the wrong type of crimp connector (too large for the earth cable and not crimped with the correct tool, as the cables were loose and came apart when inspected) and what it doesn’t show is that the connections were incorrect and this is how the socket came to have no earth! We have now rectified the situation and all is well.